NT Fill

Intended use: NT-FILL Composite Resin is a composite material made from base resin and inorganic filler to restore damaged teeth (for both front and back teeth) due to corrosion and tooth decay by light polymerization method.

Notes:

1. Warning:

• This product is for dental use only
• Only doctors and specialists can use it and must comply with the regulations in the instructions for use.

2. Note:

• Protect the patient's respiratory system with appropriate equipment
• Once the product has been cooled, leave it at room temperature and wait until it cools down before starting to use
• Avoid contact with the product. If the product gets on your skin, wash it with plenty of water and seek medical attention
• If the curing process is delayed or interrupted, check the operation of the curing lamp

If there is no problem, contact the manufacturer or your nearest dealer for advice

• Avoid contact with eyes, this product is for dental use only. If the product accidentally gets into the eyes, rinse with water and seek medical attention
• Do not use the product after the expiry date (expiry date: 2 years from the date of manufacture)

3. Contraindications:

• Do not use the product if you are sensitive to its ingredients
• Do not use the product for patients who are prone to skin irritation such as rashes or dermatitis

Instructions for use:

1. Preparation before use:

• Check the product to ensure its quality
• Check the effectiveness of the product and its adhesion
• Check the expiry date
• Make sure you understand all the notes in the instructions for use

2. How to use:

2.1 Choose a colour that matches the tooth to be treated

• Remove stains and plaque with polishing agent and water

2.2 Make sure the patient's dental cavity has been cleared of all impurities, including saliva and blood. Make sure that impurities and previous filling materials are completely removed.

• In case of remaining impurities or filling materials, they may reduce the effectiveness of the curing light, which may then interrupt the curing process of the composite material

2.3 Apply etching to the tooth

2.4 Apply the patch to the dentin and enamel area and expose to the light for 15 seconds

2.5 Apply composite

2.6 Perform gentle maintenance according to the regulations in the table below, repeat step 2.5 until the treatment is completed

[Object]

2.7 Perform polishing

3. Storage

• Close the lid tightly after use
• Avoid direct sunlight or places with high temperatures
• Store in a cool, dry place